Synthetic CLP Gun Oil - U.S. Army APPROVED


G96 Synthetic CLP Gun
Oil has been APPROVED by the U.S. Army for the 21st Century - Mil Spec MIL-PRF-63460E. Click HERE to see our approval letter. Click HERE to see the CLP Qualification Update Letter.
G96 Synthetic CLP Gun Oil has been listed as a USDA BioPreferred
"GREEN" Product. Click
HERE to go to the BioPreferred website. Please visit the FAQ section and the HOME page for additional information G96 Synthetic CLP Gun Oil is formulated for maximum gun and environmental protection. It is 85%
biodegradable and contains no VOC's. - Cleaner: Significantly improves clean up after firing
- Lubricant: Original tolerances will be maintained longer under extreme conditions
- Preservative: Unique combination of additives protect and bond to metal yet it is safer for the environment than most other additives.
Safe for use on polymers. Directions for use: If necessary, clean firearm first using G96 Bore Solvent or G96 Crud Buster. Apply G96 Synthetic CLP Gun Oil to bore, barrel actions, slide rails, trigger assemblies and all moving metal surfaces. Dampen cloth with G96 Synthetic Gun Oil and wipe down leaving a protective coating. Please refer to your firearm's owners manual if necessary. Please refer to the FAQ section for additional information. G96 Stock Numbers and National Stock Numbers: Please note that the NSN's listed are classified as "Small and Large Caliber Weapons and Weapons Systems Lubricant." They are NOT "General Purpose Lubricant"
9150-01-102-1473 0.5
oz. cylindrical plastic bottle in natural (G96 #1070)
9150-01-079-6124 4 fl. oz.
flat oval plastic bottle in natural (G96 #1053M)
9150-01-054-6453
1-pt. cylindrical plastic bottle w/sprayer in white (G96 #1071) 9150-01-327-9631 1 liter
cylindrical plastic bottle w/sprayer in white (G96 #1072)
9150-01-053-6688 1-gallon
jug plastic bottle in natural (G96 #1053G) Please be cautioned that existing NSN's are the same for the 63460D specification and the 63460E specification. Please note that lubricants that used to be qualified under MIL-PRF-63460D, or earlier, are no longer valid and do not meet the criteria of the new 63460E specification. Military organizations should be especially cautioned of this and to take care of not to use lubricants that are no longer approved.
An Initial Feasibility
Evaluation of Submerged Concealed Carry in a Salt Water Environment - August
2010
* Please note that this test was an independent
test. The person that did this test has no affiliation with G96
Products Company or Charter Arms







G96 Products Inc. - 85-5th Ave, Bldg. #6, Paterson, N.J. 07524-1112 ph: 973-684-4050 email:
info@g96.com
© G96 Products Inc. 2011